ArrayCalc Simulation Software V7.6.11 from d&b audiotechnik has upgrades including Venue, the new name for the improved room input control. It lets users define listening planes in three dimensions. V7.6 also has been updated to include the company’s xC-Series column loudspeakers and D80 amplifiers, along with other tweaks and upgrades.
Read More »
Ten mixers (from six to 20 channels) in the redesigned MG Series provide compact, cost-effective and great sounding solutions. All MG models include discrete Class-A D-PRE microphone preamps, 3-band channel EQ and high pass filters and up to four AUX sends to incorporate additional effects, access external devices or feed stage-monitoring. Models with more than 10 inputs offer newly-upgraded, one-knob compressors. Flagship XU versions feature an upgraded version of Yamaha’s renowned SPX effects processor with 24 different effects; as well as 24-bit/192kHz USB 2.0 digital connectivity and software that streamlines the recording process, including Steinberg Cubase AI. MSRP ranges from $129 to $929.
Read More »
The iQ Series features Acoustic Integration, which allows digital mixers, personal monitor systems and loudspeakers to communicate with each other digitally via the company’s Ultranet Technology. The iQ Series also offers speaker modeling capability, where users can select preset frequency contours to emulate the sound of ten of the world’s most iconic loudspeakers. Useable as FOH or monitors, the 2-way iQ15, iQ12, iQ10 and iQ8 models are lightweight and portable; companion iQ18B and iQ15B subwoofers are optional. All have 3,000W of Klark Teknik amplification and onboard DSP, which can be tweaked at the speakers, or remotely from a PC or tablet running the free downloadable app. MAP begins at $549.
Read More »
Designed for use with the Q-Sys network audio platform, CXD-Q amplifiers combine the Flexible Amplifier Summing Technology (FAST) found in the CXD/PLD amplifier platform with Q-Sys network connectivity and processing to create a flexible audio routing/power solution for install applications. These Class-D, 2-rackspace designs include the CXD4.2Q (400W/ch @ 4 ohms, continuous), the CXD4.3Q (625W/ch) and the CXD4.5Q (1,250W/ch). The CXD4.3Q and CXD4.5Q can also drive 70V and 100V systems. FAST can distribute total amplifier power across one, two, three or all four outputs enabling amp channels to be combined for maximum current or voltage output. The largest models are capable of up to 5,000 watts, with peaks up to 8,000W.
Read More »
New models in Peavey Electronics’ PV line of non-powered mixers include the PV 6, PV 6 BT, PV 10 BT and PV 14 BT consoles. All feature solid construction, reference-quality pre-amps with 0.0007% THD, direct outputs for recording, stereo channels, Bluetooth capability, digital effects, compression, 3-band channel EQ and streaming USB out. Additionally, the PV 10 and PV 14 BT offers an LCD display, USB-A MP3 playback, high-pass filters and Kosmos-C™ bass and treble enhancement. A 5-year warranty is standard.
Read More »
Neutrik updates and improves its line of multimedia chassis connectors and cable assemblies. Chassis connectors in nickel or black finish fit into Neutrik’s standard D size cutout. They are available for HDMI 1.x, USB 2.0 (with reversible A-to-B inserts), FireWire 400 and D-Sub (9-/15-pin) connectors. All are feed-through designs, making integration literally a snap. For HDMI 1.x and USB 2.0, Neutrik’s rugged, pre-terminated cable assemblies feature outer shells with IP65 water and dust protection when mated to the Neutrik chassis connectors. Neutrik also offers pre-terminated cable assemblies in standard lengths (1/3/5 meter, etc.)
Read More »
Firmware v2.60 or higher for NTi Audio’s XL2 handheld analyzer allows the spectral analysis of audio signals in dBu, dBV and volts. A new Spectral Limits Option extends the analyzer to 1/12-octave resolution, while the XL2 Remote Measurement Option lets users integrate XL2 monitoring/control into PC-automated test sequences. Frequency spectrum analysis in dBu , dBV or volts is available with the standard XL2 instrument in octave, third-octave and linear FFT resolutions and the unit automatically switches to dBSPL for sound level metering when an NTi measurement mic is connected. All measurements can be stored as ASCII data for later analysis with spreadsheet programs on Mac or PC.
Read More »
New Gravis full range and Nomos sub models include the Gravis 8 (2-way 8-inch/1-inch-exit HF) and Gravis 15 (15-inch LF/1.4-inch HF). With a max 129 dB SPL, the Gravis 8 is a general-purpose nearfield design, but it is also intended front-fill, side-fill and delay applications. The Gravis 15 is intended for short and medium throw use and all Gravis enclosures have 35° and 55° cabinets for doubling as stage wedges. Four new Nomos subs include both single and double-15 and -18 systems — all combinable for cardioid arrays.
Read More »
JBL Professional’s PD6000 Series is designed for mid to large venues requiring precise pattern control and high output — either individually or in arrays. The series consists of 14 models, with four 3-way full-range systems, four 12-inch 2-way’s, four 2-way mid-high systems and two LF models. Coverage includes the original 40 x 30, 60 x 40 and 90 x 50 and a new 60 x 60 system, and are rotatable for horizontal or vertical use. All PD6000 systems are voiced similarly to JBL’s PD700 and AE Series for consistent sound character throughout an installation. Models are available in white as well as weather-resistant versions.
Read More »
DPA Microphones’ d:vote 4099 Rock Touring Kits, are offered either as four mics or 10 mics in a Peli case package. Tiny and lightweight, yet rugged, each d:vote has a versatile gooseneck, sturdy shock mount and heavy-duty detachable cable; and can easily be unclipped and repositioned or moved to another instrument with only one hand. The 10-piece Rock Touring Kit has 10 high-SPL d:votes, 10 microdot-XLR adapters, 10 mic cables, seven drum clips, five sax/trumpet clips, four universal clips, two for each guitar, violin, piano, cello and one for bass. The smaller kit has four d:votes with two universal clips and four for each drum, sax and trumpet, as well as four mic cables and four microdot adapters.
Read More »
Well-known to live, studio and broadcast users worldwide, the beyerdynamic DT 770 Pro headphones are now offered in a 32-ohm version for optimal use with smartphones, mobile players and notebooks. The output of mobile devices is typically too weak to handle standard pro-level impedances of 80 to 250 ohms, resulting in a strained sound that isn╒t loud enough. This new 32-ohm version also features comfortable softskin ear cushions, a shorter 63-inch cable suited for with portable devices.
Read More »
Designed for use with iPad and other tablet devices, the X18 compact digital mixer features Midas preamps, virtual FX, built-in wireless router and Ultranet. The 18-input/12-bus design has onboard 31-band graphic EQs, models of Lexicon effects processors, Fairchild and Teletronix compressors and Pultec EQs and free, downloadable iOS and PC apps that lets users operate the X18 from anywhere in the venue. An onboard 18 x 18, bi-directional USB interface allows recording directly to an iPad or PC. MAP is $799.
Read More »