Skip to content

Sonifex AVN-DIO12 Dual Mic Preamp with Dante Output

Share this Post:

The Sonifex AVN-DIO12 Dual Mic Preamp is PoE powered and has and a Dante output
The Sonifex AVN-DIO12 Dual Mic Preamp is PoE powered and has and a Dante output

New in the Sonifex DIO range of Dante input/output devices, the AVN-DIO12 is a dual-microphone input to Dante converter with adjustable mic gain — using PoE powering. The unit is essentially two AVN-DIO09 units in a single chassis, still offering A/D circuitry with a world-class E.I.N. of 129 dB. The unit can be used standalone or with optional underdesk or rack mounts.

It features two balanced analog XLR inputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network. Each mic has coarse and fine gain controls, high pass filter, phantom power & tri-color level LED and can be routed via Dante Controller to any Dante receiver.

The unit is powered using Power over Ethernet (PoE), using a Neutrik etherCON connector for power and data redundancy. The AVN-DIO12 uses the latest Audinate Dante chipset so is AES67 and Dante Domain Manager compliant.

Operations

The AVN-DIO012 has coarse and fine mic gain for each microphone input. The coarse gain is set using the toggle switch, which provides 20dB/50dB of gain. The fine gain can be set using a trimmer adjustment tool, or small flat blade screwdriver, and adds between 0dB and 36dB of additional gain.

High Pass Filter

Each microphone input has an on/off toggle switch which turns the high pass filter on or off. When enabled, it acts on frequencies below 125Hz at a roll-off of 6dB/octave.

Phantom Power

Phantom power is enabled/disabled via a toggle switch on the front panel for each microphone input. When enabled, a 48V DC supply is provided to power an appropriate microphone. The red LED next to each input will illuminate to indicate phantom power is enabled.

Audio Level LED

To help users set mic gains, a front panel level LED for each microphone input displays the audio level being sent to the Dante network.  The indicator thresholds are as follows: Off: Level is under -38dBFS (-20dBu); Green: Level is between -38dBFS (-20dBu) and -18dBFS (0dBu); Amber: Level is between -18dBFS (0dBu) and -10dBFS (+8dBu); Red: Level is above -10dBFS (+8dBu)

_______________

More info from USA distributor Independent Audio, www.independentaudio.com.