Skip to content

RCF SUB 8004-AS 18” Subwoofer

Share this Post:

RCF’s SUB 8004-AS is designed to offer ample low frequency with a high power, hyper vented 18” woofer, with 4” inside/outside voice coils. The unit is powered by a 1250W digital amplifier module and its input board includes volume control, deep/punch switch, high pass switch, phase switch, cardioids and time delay controls.

 

More details from RCF (www.rcf.it):

SUB 8004-AS ACTIVE HIGH POWER SUBWOOFER

– 2500 Watt

– 136 dB max SPL

– 30 Hz – 120 Hz frequency response

– 18” RCF Precision 4.0 voice coil vented woofer

– DSP controlled Input section with selectable presets

– On board time delay control

– Baltic birch plywood tour grade cabinet

The custom designed 18” woofers feature 4 hyper vented, inside/outside, voice coil for excellent power handling and superior thermal performance. Powered from a digital amplifier integrated to the rear, in a separate chamber and mechanically insulated from vibrations.

STACKING the HDL 10-A, up to 4 HDL 10-A can be stacked on top of 2 SUB 8004-AS using the HDL 10-A fly-bar.

POLE MOUNTING the SUB 8004-AS is equipped with a M20 rugged insert on top of the cabinet to easily pole mount one NXL 24-A or any two-way RCF speaker.

STACKING the NXL 23-A, A dedicated accessory, the “Stacking bar NXL 23-A”, is available to stack up to 4 NXL 23-A on top of 2 SUB 8004-AS

STACKING the HDL 20-A, up to 4 HDL 20-A can be stacked on top of 2 SUB 8004-AS using the HDL 20-A fly-bar.

STACKING the 2 x NXL 24-A, two NXL 24-A in HF close-coupling configuration can be mounted on top of a SUB 8004 using the accessory “stacking kit 2X NXL 24-A”

STACKING the HD 32-A, thanks to the M20 rugged insert on top of the cabinet a HD 32-A can be easily pole mount on SUB 8004-AS.

The input section includes Volume control, Signal, Power and Limiter LED’s; Deep / Punch, High pass, Phase and Cardioids switch; Delay control; Xover and XLR signal link The SUB 8004-AS is equipped with two M20 rugged inserts.

TWO POSITIONS: The SUB 8004-AS is equipped with feet, rotatable logo and side mounted M20 insert, to be used in vertical or horizontal position.