InfoComm — well, a REAL InfoComm show — is finally back and returns to the expanded Las Vegas Convention Center with three days of exhibits from June 3-5, 2022. There should be lots to see — and hear — and even just days after the NAMM Show, InfoComm promises more than a few surprises in terms of new product unveils, and in Las Vegas, that is what’s known as a safe bet.
With that in mind, we present this section with peeks at a few of the sound reinforcement and audio installation goodies (listed alphabetically) you should check out while at the show. Speaking of that, team FRONT of HOUSE will be there, checking out the action to report on fohonline.com and in future print (and digital versions) issues of the magazine. See you there!
1 Sound Contour CT28
The Contour compact, 3-way passive horn-loaded speaker delivers a controlled 100° x 50° directional coverage down to 200 Hz, with a bass response to 70 Hz. Its point-source, medium- to-long throw design maintains its directionality in the far-field and can deliver a max SPL of 145 dB, yet sounds intimate at lower volumes. Components include two 8” LF drivers, a 4” with a 2-inch coaxial MF/HF driver in a 13.6 x 13.6 x 20” Finland birch cabinet in black or white with custom colors available.
www.1-sound.com; InfoComm #W2755
Adamson Load Library 5.3
Load Library 5.3 for the Lake Processor optimizes the ease of use of linear phase and conventional crossover settings. Defaults for E, S, and IS-Series cabinets use linear phase x-overs; additional settings for S and IS-Series cabinets offer 5ms less latency by using conventional crossovers. Additional subwoofer presets are time-aligned to conventional crossover presets and can be used when subs are placed farther from the reference position to avoid applying delays to line arrays or point sources.
www.adamsonsystems.com; InfoComm #W2923
Allen-Heath Expands Audio Matrix Processor Line
The AHM Audio Matrix Processor range now includes the AHM-32 and AHM-16. Also new are CC-7 and CC-10 Touch Panels for custom control and three compact Dante expanders — the DT20 with two mic/line inputs; the DT02 with two XLR line outputs; and the DT22 with 2×2 I/O on Phoenix connectors. Based on the AHM-64, the AHM-32 and AHM-16 open the platform to a wide range of installs, with ease of programming and control, and expandable audio networking and I/O capabilities.
www.allen-heath.com; InfoComm #W2213
Ashly Audio SP-8.1P Passive Subwoofer
The SP-8.1P passive subwoofer offers 150w handling power in an 8-inch package for installation in areas where a larger subwoofer wouldn’t typically fit. Specs include a sensitivity of 95dB (1W@1m) and a frequency response of 43 Hz-180 Hz (-10dB), while DSP voice presets provide frequency response tailoring, delay and crossover settings with Ashly’s IS and AW speakers with AquaControl and Protea-equipped processors. And 10mm threaded holes along the top, sides and rear accommodate optional hanging eyebolts.
www.ashly.com; InfoComm #W2709
Audio-Technica 3000 Series Wireless IEM System
The ATW-3255 in-ear system is easy to use and offers high-quality sound. Its transmitter has front-panel controls and a large OLED display. Features include a compact bodypack receiver; pro ATH-E40 earphones; wide-band UHF coverage with 138 MHz of tuning range from 470-608 MHz; diversity antennas for stable reception in crowded RF environments; pan/personal mix controls; a cue mode so an audio engineer can monitor several IEM channels from a single receiver; and network monitoring/control via A-T’s Wireless Manager software.
www.audio-technica.com; InfoComm #W1713
Crest Audio CPX Series of Power Amps
The CPX Series from Peavey’s Crest division range from 480W to 1,600W/ch, can operate at line voltages as low as 50% of nominal and drive loads as low as 2 ohms/channel (4 ohms when in bridge mode). A Gain Comparator Limiting) system with defeat switch monitors input/output gain, reduces the signal to protect speakers from excessive high current conditions, dangerous transients and unexpected level changes. Onboard processing includes two crossovers and a subsonic filter.
www.peaveycommercialaudio.com; InfoComm #W1247
d&b audiotechnik 5D Amplifier
The 5D is an installation-specific, four-channel DSP amplifier featuring integrated audio networking and flexible output power sharing — all within a 1 RU, 9.5” wide, ultra-compact design. With 600 W per channel, this newest addition to the d&b family addresses a broad range of small- to mid-scale installation projects. Inputs are analog (Euroblock) and Dante (RJ-45); outputs for the four channels are on two 4-pin Euroblock connectors.
www.dbaudio.com; InfoComm #W2822
DAS Audio LARA Cardioid Line Array
LARA is a large-format self-powered (6,000 Watts) cardioid line array that can reproduce max SPLs of 146 dB. The driver complement in the system is two 12” woofers, two rear-firing 8”woofers and two front-firing 3” compression drivers. The 14 x 46 x 25.4” (HxWxD) enclosure weighs 193.6 pounds. Also new is a companion cardioid subwoofer with two front-firing 18” woofers and an 18” rear-firing driver in a 21.9 x 46 x 40”, 275-pound enclosure.
www.dasaudio.com; InfoComm #N3232
EAW AC6 ADAPTive Column Loudspeaker
The latest addition to EAW’s ADAPTive line, the AC6 is a 2-way, full-range ADAPTive column speaker with six LF drivers and 30 HF transducers, providing a 65 Hz – 20 kHz bandwidth and 143 dB max SPL for clear and dynamic sound with a pristine impulse response. Features include: management via EAW’s Resolution 2 software with Adaptive Performance coverage, directivity compensation and EAW’s Focusing and DynO digital signal processing.
www.eaw.com; InfoComm #W3503
Electro-Voice MTS Series
The MTS series consists of large-format, single-box, full-range, horn-loaded loudspeakers in point-source configurations with four 15” woofers and two 1.4” exit coaxial mid/high frequency compression drivers. All are capable of generating peak SPLs in excess of 151 dB with controlled directivity for very long-throw applications. Another version with complementary performance to the standard three-way models adds two side-firing 15” woofers in a separate rear chamber to create a cardioid configuration.
www.electrovoice.com; InfoComm #W211
Fulcrum Acoustic High Output Coaxial Horn
Stemming from its AH model, the AHC2 High Output Coaxial Horn retains the compact enclosures and features of the original AH while incorporating higher output drivers. AHC2 products are available in multiple horn patterns and have two high-power 10” woofers and a coaxial MF/HF compression driver, using Compression Head horn architecture and Oculus Phase Plugs to extend the length of the LF horn while minimizing cabinet depth. AHC2 models provide broadband pattern control below 400 Hz and LF extension below 80 Hz.
www.fulcrum-acoustic.com; InfoComm #W3017
Holoplot Immersive Matrix Array
The X1 Matrix Array line — including the X1 Modul 96 fullrange speaker array and X1 Modul 80-S + subwoofer — uses 3D audio beamforming and wavefield synthesis to steer sound beams (vertically and horizontally) to desired areas. Based on advanced software and Cloud connectivity, X1 is a smart system with up to 96 individually amplified drivers (including 80 dome tweeters) per cabinet, for studio-grade quality even at high SPLs. This IoT-enabled system opens up a world of possibilities for remote control, monitoring and smart servicing.
www.holoplot.com; InfoComm # W3146
iSEMcon iSEMic CPX-1212 Measurement Mic
The iSEMic CPX-1212 is a Class-1 mic featuring an interchangeable ½” nickel-diaphragm FP1212 capsule on a CPX-12 iSEMtron stainless steel preamp body with 48-volt phantom powering (12 VDC wireless ready) and 155 dB SPL handling without clipping. It’s also offered as a kit (shown) with case, mic clamp, windscreen and calibration download from the company’s website.
www.isemcon.com; InfoComm #W3425
JBL SRX900 Series
Designed for rentals and installs, the SRX900 Series of powered systems includes dual-6.5” and dual-10” line arrays and complementary 18” and dual-18” subs. User-configurable DSP and design/management software offer control from a computer or mobile device. JBL’s Radiation Boundary Integrator mounts both the HF and LF drivers on a single horn, improving horizontal dispersion while minimizing cabinet size. Rear-panel LCDs provides access to key control features. Options include array frames, pole-mount and truss-clamp adapters, cases, carts and covers.
www.jblpro.com; InfoComm #W215
K-array Kommander Power Amps
The new Kommander series amplifiers incorporate cloud-based technologies thanks to the Integrated Electronic Brain (IEB) aboard each amp. Meticulously built with network-integrated DSP processors and Class-D amp modules, these 2U models come ready to drive any K-array passive product with 4 to 8 channels of amplification, all with optical limiters and overcurrent, short circuit and thermal protection. The flagship Kommander-KA208 (shown) features eight 2,500W channels.
www.k-array.com; InfoComm #W3154
König & Meyer 23900 Mic Quick-Release Adapter
The model 23900 Quick-Release adapter facilitates the quick and easy change of mics or other accessories on stage or in the studio. By pressing the grey button, the threaded bolt is unlocked and can easily be removed. Included in the package are two threaded bolts. The body of the adapter is made of high-quality aluminum, which makes it very lightweight, yet robust. The support for the threaded bolt is made of impact-resistant and low-noise plastic.
www.k-m.de; InfoComm #W867
L-Acoustics Soka Colinear Source
L-Acoustics’ new ultra-shallow Soka delivers 124 dB over a wide bandwidth that extends down to 70 Hz, or 130 dB down to 100 Hz. The companion SB6i sub has two 6.5-inch neodymium LF drivers using L-Acoustics’ Laminar vent technology and operates down to 29 Hz with up to 114 dB. Rear mounts allow installs in any orientation — flush or with Pan, Tilt, and PanTilt. Both Soka and SB6i are rated IP55 for indoor or outdoor installs.
www.l-acoustics.com; InfoComm #W3011
Lab.gruppen FAD Power Amplifiers
AVL Media Group, the North American distributor of Lab.gruppen, Klark Teknik, Turbosound, Midas, Tannoy, Zero-Ohm Systems and Spotlight will be showing for the first-time new FAD power amplifiers from Lab.gruppen. Available in three models (60, 120, & 240 watts / channel), these single-rack height, half-rack, commercial amplifiers feature Dante connectivity, remote control and GPI functionality using standard RJ-45 connectors. Rack mount kit included. Available now.
www.labgruppen.com; InfoComm #W3411
Lawo HOME/Merging Technologies Solutions
Lawo has integrated Merging Technologies solutions with Lawo’s HOME infrastructure management platform — all enabled through a single control API. The result is that the parameters on Merging products can be conveniently tweaked from a Lawo mc²-series console with built-in HOME functionality. Currently, Merging’s Anubis and Hapi MKII products are HOME compliant, with more expected later this year.
www.lawo.com; InfoComm #W2955
Meyer Sound PANTHER Line Array
Designed for large-scale touring and install, Meyer’s flagship PANTHER line arrays combine two long-excursion 12” woofers and 3” compression drivers with four channels of onboard Class-D powering fed from a dual (analog/Milan AVB network) input module. Three models offer different horizontal dispersion: the 95° PANTHER-M; 110° PANTHER-W; and 80° long-throw PANTHER-L. PANTHER produces nearly the same power and headroom as LEO in the footprint of LYON, yet weighs just 150 pounds. All have IP55 weather protection-rated enclosures.
www.meyersound.com; InfoComm #W3023
Neutrik powerCON TRUE1 TOP L Cable Connectors
New “L” suffix connectors accept cable O.D.’s of 10-16 mm, are ideal for extra hard service SOOW 12/3, SJOOW12/3 and H07RN-F3G2.5 cables. NAC3FX-W-TOP-L injects power into a device or a coupled cable. NAC3MX-W-TOP-L receives power; both are rated to 20A (16A in Europe) and 250 V AC. All are IP-65 rated in the mated condition and built from UV-resistant materials.
www.neutrikgroup.com; InfoComm #N1413
Pliant High Density Update for CrewCom
The v1.10 firmware update for Pliant Technology’s CrewCom pro wireless adds new major features, including a High Density mode that increases user densities, supporting up to 32 Radio Packs (RPs) on a single Radio Transceiver (RT) while allowing any of the RPs to communicate using four available full-duplex talk paths. Also, a new Auto Configuration function simplifies system setups. The upgrade is free and available from the Pliant Technologies website.
www.plianttechnologies.com; InfoComm #W2530
punQtum by Riedel Network-Based Intercom
The punQtum Q-Series digital partyline intercom system is a digital, easy to use, full-duplex communications solution for theater and event applications. The system uses the advantages of modern IP networks and works “out of the box,” but can be quickly configured by user-friendly software to meet individual needs. There is no master station or other central point of intelligence; all processing is handled locally in each device with a capacity of 32 channels, four program inputs, up to four public announce outputs and 32 control outputs.
www.punqtum.com; InfoComm #N1320
RCF NX 985-A
The three-way, active NX 985-A is designed for clubs, bands and P.A./rental companies, whether used alone or with the new SUB 8008 double-18” subwoofer. The stacked or flyable wood cabinet has a 15” woofer, 6” cone mid and 1.75” compression driver on a 100° x 60° horn with up to 138 dB max SPLs with 2,100W of biamplification and proprietary FIRPHASE DSP. The SUB8008’s 4,400-watts offers 137 dB max SPL with 12 onboard presets driving its twin long-excursion 18” woofers.
www.rcf-usa.com; InfoComm #W3223
Renkus-Heinz PCX Series
The PCX Series incorporates Renkus-Heinz’ UniBeam steerable capability in passive columns. Passive UniBeam addresses each transducer with a passive filter network, generating an asymmetrical vertical dispersion, shaping the coverage downwards for consistent front-to-back coverage with minimal side lobe artifacts. The PCX will be available in three sizes — PCX4, PCX8 and PCX16 — all utilizing 3” full-range neodymium drivers for a discrete appearance. All models are IP64 weather resistant; options include pan/tilt brackets.
www.renkus-heinz.com; InfoComm #W3103
RF Venue Wireless Upgrade Packs
Designed to help eliminate wireless mic and IEM dropouts in the house of worship environment, RF Venue’s Wireless Microphone Upgrade Packs and In-Ear Monitor Upgrade Packs provide the complete remote antenna system necessary to improve wireless reliability, with no tuning or adjustments needed. The packs are available with various antennas to fit the needs of any church, engineered as a complete system with DISTRO4 and DISTRO9 HDR RF distribution amplifiers, RF Venue’s patented Diversity antennas and high-quality cabling.
www.rfvenue.com; InfoComm #W1139
Shure MXA920 Ceiling Array Mics
With Shure’s exclusive Automatic Coverage technology, MXA920 ceiling array microphones provide pre-configured audio capture with minimal set up, reducing the deployment times and costs for integrators. The MXA920 also employs Next Generation Array Architecture for enhanced directional pick-up and more natural speech. Plus, the onboard IntelliMix DSP delivers noise and echo-free performance for audio clarity and intelligibility and two form factors (square and round) support integration into even the most sophisticated facilities and meeting spaces.
www.shure.com; InfoComm #W2003
Void Acoustics Cyclone 4
Void Acoustics expands its IP-55 rated Cyclone series with a smaller, compact solution for outdoor venues and entertainment spaces. Inside the molded ABS enclosure (available in all RAL colors) is a single, passive 4” coaxial driver with a 0.75” soft dome tweeter. Its weather-resistant 5.9” x 7.1” x 6.9” enclosure features UV-resilient paint and a marine-grade stainless steel grille. Specs include an 83 Hz to 23 kHz (±3 dB) frequency response, 30-watt AES power handling and 108 dB maximum peak SPLs.
www.voidacoustics.com; InfoComm #W3417
Waves MyFOH
Waves Audio’s version V13 of all Waves SoundGrid applications includes two brand-new apps: Waves MyFOH, a tablet app for remote control of the Waves eMotion LV1 live mixer; and Waves mRecall, a mobile app for remote snapshot / scene recall of Waves live sound (eMotion LV1 & SuperRack) and Waves Commercial Audio systems. V13 also includes updated versions of the eMotion LV1 live mixer, SuperRack live plug-in rack, MyMon personal monitor mixing app, SoundGrid QRec app for live recording and playback and SoundGrid Studio.
www.waves.com; InfoComm #W1912
